.030 Undersized Steering Arm, IH fits 66 series tractors

This is a NEW Undersized SPLINE type steering arm that fits IH tractors 766 through 1568 

Part #s: 

531249US (RH side)

531248US (LH side)

These also may be used on 826, 1026, and late 56 tractors, but the toe in will need to be adjusted because the splines are not indexed the same as the original IH arms. I cannot get the arms with the correct spline index for the those tractors but these arms will work.  

Please specify if your spindle has a square shoulder under the spline or a snap ring groove under the splines.

This arm is .030 undersize spline and will fit original design spindle. This is the original design, not the taper lock style. If your spindle splines are wore, these arms will fit tight on the spindle splines.

Note:  These may not work on some 86 series spindle knees due to a taller shoulder on the knee. For 86 and 88 series tractors use part number 531249US86 and 531248US86  

These WILL NOT fit on new spindles.

Fits IH Tractor models:

766
966
1066
1466
1468
1566
1568
HYDRO 100